How to get your Canon LIDE 60 scanner working in Lion

It took me a while to get my canon scanner working under Lion. The trick is that there are two programs that you need to install – the scanner program and the driver. This works for Leopard and Snow Leopard too.You need to install the canon toolbox which is the general canon scanning program called “CanoScan Toolbox Ver. 4.9.3.4X (Mac OS X)”  but you also need to install the ‘driver’ for your particular printer (for my printer it was called “LiDE 60 Scanner Driver Ver. 11.1.3.0X (Mac OS X)”. There’s no where I could see on the canon page that tells you you need to download BOTH these files.
I found both these by going to the canon page here, and typing in  ‘LIDE 60’ Then I got a list of options, and I chose the link under my printer ‘CanoScan LiDE 60’ which took me here. I clicked drivers and downloads which took me here. Both the files were there in the list. Install the toolbox first, then the driver, then you’ll need to restart.

It then gave me an error as follows:

“The system extension “/System/Library/Extensions/CNQL1212_ClassicNotSeize.kext” was installed improperly and cannot be used.”

This is apparently an old file Canon forgot to remove. Remove it manually from, here:

/System/Library/Extensions/CNQL1212_ClassicNotSeize.kext

All working!

Posted

, , , ,

Related posts:

  1. Snow Leopard First Impressions There was a knock on the door at 10 past 8 this morning – it was the Snow Leopard delivery man. I live in Dubbo, NSW, 6 hours drive from Sydney. I can’t believe Apple’s efficiency! …
  2. How to install an Imagerunner printer in Snow Leopard Canon have finally released drives for Snow Leopard for their Image runner printers!!! …
  3. How to match the colours on your monitor to your printer. If you have ever designed a colour document on your computer and then printed it out on your inkjet or laser printer you may have noticed that the colours come out slightly different. …
  4. How to install OSX Lion on multiple computers Installing Lion across multiple computers….
  5. How to make an OS X Lion USB thumb drive Here are three different ways to put Lion on a USB thumb drive….
  6. Scansnap S1500 now working in Catalina This week Fujitsu surprised everyone by releasing new software that allows older scanners to work with OSX Catalina. The software is 64 bit and works works in MacOS 10.15, it supports older models like the ScanSnap S1500, and it fully…

New Posts

Latest Comments

Article Categories

Comments

60 responses to “How to get your Canon LIDE 60 scanner working in Lion”

  1. Peter

    Thanks for the tip! I had downloaded the driver before the toolbox and could not for the life of me get it to work. Followed your tip and easy-peasy worked like a charm! Thanks so much!!!

    Reply
  2. Karen

    Spot on to the person who said plug the scanner directly into the pc – not via the hub. Worked straight away after a lot of previous frustration.

    The clue sinked in when I noticed the scanner was trying to start up when asked to scan but not following through. Thanks

    Reply
  3. Bob Media

    Wayne
    Thank you-thank you-thank you. Followed your instructions to the letter. Scanner works again like a dream.
    I now wish I could find a work round to keep my Laserwriter 4/600ps working under Lion. Once again thank you.

    Reply
  4. chris

    Just wanted to say that I downloaded both files described above (installed them backwards…driver first then toolbox), then opened the toolbox, clicked save, then scan and had no problems at all. I did not remove any files (as described above).

    I am running OS X version 10.7.3

    thanks for the help, folks

    Reply
  5. Bruce

    Running Mac OS 10.7. 3. Downloaded both files, scanner plugged directly into iMac, deleted extension file and still no luck,. When trying to scan using Toolbox 5.0, received message “Failed to open driver.”

    Reply
  6. Leah

    THANK YOU SO MUCH!!! All installed on Lion! Funny thing though, I downloaded both the driver and toolbox, and I didn’t need to install toolbox… the scanner works on just the driver. Hmm!

    You did a lot of people a service by posting. Thank you!!

    Reply
  7. Marissa

    THANK YOU!!!!!!!!!!!!!!!!!!

    Reply
  8. Harmya

    Well guys, I tried all this and nothing worked ! After 2 days of research, I finally have my scanner up and running smoothly… and I’m dead happy! How, simple;
    By chance, I checked directly with Cannon, and guest what, I should have started there..

    http://fr.software.canon-europe.com/products/0010220.asp

    You will find all infos, drivers and toolbox for your scanner to work under Lion!
    Good luck

    Reply
    1. Wayne

      Thanks for that link.

      Reply
  9. gaap

    thank you so much, it took a while
    but now it works fine!
    and shame on canon and apple for creating software
    that isnt directly compatible for simple users like me

    Reply
  10. markus.

    Thanks! I got it working also on Mountain Lion (10.8.1) using this tip.

    Downloaded Toolbox from here:

    http://www.canon.de/Support/Consumer_Products/products/scanners/LiDE_series/CanoScan_LiDE_60.aspx?DLtcmuri=tcm:83-741070&page=1&type=download

    and the driver from here:

    http://canoncanada.custhelp.com/app/answers/detail/a_id/4158/~/lide-60-scanner-driver-ver.-11.1.3.0x-(mac-os-x)

    Installed first toolbox, then driver. Restarted. Works like a charm.

    Reply
  11. Jon

    Just downloaded the driver and installed. Never downloaded the toolbox.

    Removed the file, as in the post above, and then added scanner in settings. Just tested, and it worked with Mountain Lions own scanner function.

    /Jon

    Reply
  12. Phil

    In Mountain Lion. I followed the original instructions. Deleted the file mentioned (/System/Library/Extensions/CNQL1212_ClassicNotSeize.kext) though it was causing no problem. Added my scanner in the system prefs “Printers & Scanners” and it seems to work perfectly! Works in my Adobe Pro and the Canoscan toolbox.
    Thanks!

    Reply
  13. Petey

    Worked poifectly!

    Thanks!

    Reply
  14. Carl

    Was looking for this fix everywhere as one of our customers was experiencing the same issues, downloaded toolbox and driver, amended log files and restarted. Works great now! Thanks for the advice.

    Cheers

    Carl
    The Scanner Shop

    Reply
  15. Jude

    It works in Mountain Lion as before. I followed instructions you said (had no CNQL file) but removed all bits from a previous attempt to install so there was no Canon scanner files on the computer. Downloaded the files. Installed the Toolbox first. Then the Driver. Restarted. Plugged the scanner in, and voila it scanned first time. Set it up to open in iPhoto as I had it before Mountain Lion. Its perfect. Thank you.

    Reply
  16. FM de Graaf

    I also was looking for a working driver for ML 10.8

    i bought a new canon scanner Lide 110 it’s working perfect.

    I tried my old scanner( Canon Lide 60) or it should work with this installed canon driver
    i’am surprised my old scanner, lide 60 is working min Ml 10.8.4
    photoloader does not recognise it. But Vuescan does. i use Vuescan 9.2.21

    so the Lide 110 software works on 10.8 en higher for the Lide 60

    Reply
    1. Henry Newcomb

      WOW – thankyou! got given a lide 60 and fustratingly wanted to make it work and have spent a long time trying different software and drivers (and didn’t want to buy a new one). nothin was working and then found your link.. not sure which bit is the magic bit as downloaded all the drivers for the 110 and vuescan but it works – if you see this – thankyou loads !

      hopefully by writing some words below this it will come up on google and help others

      canon lide 60, failed to open driver, mavericks, os x 10.9.4, scanner not working, recognising, system preferences.

      Reply
      1. Wayne

        Thanks Henry!

  17. Cora

    Also working on Yosemite, Thanks !

    Reply
  18. Sarah

    Hi Having issues deleting the CNQ extension file. Any guess’s?? Downloaded both the scanner driver and the Canonscan ToolBox, but unable to delete CNQ extension. Even under admin – not happening.

    Reply
  19. Printerstuff

    Thank you for sharing this useful tips. Its works! I done step by step that you given.

    Reply
  20. Mart

    Confirmorks on os x 10.14.6 Mojave!
    On Lide 60 scanner.

    Big thanks for sharing to OP. (Now we don’t need to pay 5$ a month to Vuescan)
    Searching and dl the Canoscan package and Lide 60 driver on various canon (official) websites was straightforward.
    I tried only the driver first (as per another blog) but that does not workYou do need both the canoscan package (an ancient UI :), and next the Lide 60 driver.

    On the canon websites you may also be prompted for another driver: deldrvosx1510efg.dmg. You don’t need that driver, and if you try to install osx will also refuse, at least for Mojave (probably not for anything higher than 10.6)

    The Lide 60 driver installation did prompt me to change permisions in Mac’s security (in system preferences). You need to allow canon to download and install apps….
    Deleting the CNQL1212_ClassicNotSeize.kext probably another valuable tip.
    For both you need admin rights.
    Tip: when installing the canon drivers osx may refuse because from “unidentified developer”. In that case you need to right click the .pkg file and choose “open”. Mac will then ask you to (really) agree to install the file. Or may prompt for admin pw.

    many happy scans

    Reply
Older Comments
1 2

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Exit mobile version